rpmdevtoolsで環境作ってRPM作成したらcheck-rpathsがエラーを吐いた

linux

（追記）n0tsに「俺のエントリ読んでないだろ」と怒られた。よりよい解決策はRPM のビルド環境を整えるときの Tips | Carpe Diemで。その時は困ってなかったので途中まで読んでスルーしてましたサーセン。

今までは手動でmkdirとかして~/rpmに環境作ってたんだけど、試しにrpmdevtoolsを入れて、fedora-buildrpmtreeコマンドで環境を作ってみました。

で、rpmbuild -bb hogehoge.specとかすると

+ /usr/lib/rpm/check-rpaths /usr/lib/rpm/check-buildroot
*******************************************************************************
*
* WARNING: 'check-rpaths' detected a broken RPATH and will cause 'rpmbuild'
*          to fail. To ignore these errors, you can set the '$QA_RPATHS'
*          environment variable which is a bitmask allowing the values
*          below. The current value of QA_RPATHS is 0x0000.
*
*    0x0001 ... standard RPATHs (e.g. /usr/lib); such RPATHs are a minor
*               issue but are introducing redundant searchpaths without
*               providing a benefit. They can also cause errors in multilib
*               environments.
*    0x0002 ... invalid RPATHs; these are RPATHs which are neither absolute
*               nor relative filenames and can therefore be a SECURITY risk
*    0x0004 ... insecure RPATHs; these are relative RPATHs which are a
*               SECURITY risk
*    0x0008 ... the special '$ORIGIN' RPATHs are appearing after other
*               RPATHs; this is just a minor issue but usually unwanted
*    0x0010 ... the RPATH is empty; there is no reason for such RPATHs
*               and they cause unneeded work while loading libraries
*    0x0020 ... an RPATH references '..' of an absolute path; this will break
*               the functionality when the path before '..' is a symlink
*
*
* Examples:
* - to ignore standard and empty RPATHs, execute 'rpmbuild' like
*   $ QA_RPATHS=$[ 0x0001|0x0010 ] rpmbuild my-package.src.rpm
* - to check existing files, set $RPM_BUILD_ROOT and execute check-rpaths like
*   $ RPM_BUILD_ROOT=<top-dir> /usr/lib/rpm/check-rpaths
*
*******************************************************************************

なんてエラーが出て止まる。

「WARNING: 'check-rpaths' detected a broken RPATH and will cause 'rpmbuild'」でググったら、

こういう情報が出てきた。書いてある通りに、

echo -n "Rpath check: "; grep -qi check-rpaths ~/.rpmmacros && echo yes || echo no

したら

Rpath check: yes

って返ってきたので、そのまま記述に従って~/.rpmmacrosを

%_topdir      %(echo $HOME)/rpmbuild
%_smp_mflags  -j3 
#%__arch_install_post   /usr/lib/rpm/check-rpaths   /usr/lib/rpm/check-buildroot

のように3行目をコメントアウトしたら、rpmbuildが通った。いいのかこれで？